Recruiting Talents

Recruiting Talents

Research and Development of Hard Anodizing Process


1. Led the development of hard anodizing processes for aluminum alloy vacuum chambers and large structural components, including 6061, 6082, and 5083 alloys, employing both low-temperature sulfuric acid and mixed-acid methods, with a controllable film thickness ranging from 25 to 75 μm.
2. Overcome industry‑level challenges such as achieving uniform film thickness across large‑size cavities (±5 μm across the entire cavity), suppressing edge effects, and optimizing mask and fixture design, thereby establishing a process window for anodizing production lines.
3. Development of semiconductor‑grade post‑processing technologies: pore sealing (thermal, cold, or nickel‑free), ultra‑clean low‑particle cleaning, and surface roughness control, to meet the particle and metal contamination audit requirements of wafer fabs and panel manufacturers.
4. Establishment of a coating‑performance evaluation system: comprehensive testing capabilities covering film thickness, microhardness (HV 350–500), dielectric withstand voltage, adhesion, salt‑spray resistance, plasma‑erosion resistance, and vacuum outgassing rate.
5. Lead mass-production defect resolution efforts—addressing issues such as chalking, cracking, ablation, color variation, and whitening—and establish a defect‑mapping database along with an SPC‑based process‑control system.
6. Collaborate with the precision machining team to control the impact of pre‑treatment processes—deburring, residual stress, surface roughness, and chemical degreasing/alkaline etching—on the underlying oxide film, thereby establishing a closed-loop process covering the entire “machining–oxidation–cleaning” workflow.
7. Responsible for managing bath life, optimizing chemical consumption, and ensuring compliance with wastewater treatment regulations, thereby supporting production ramp-up and cost-reduction objectives.

Job Requirements:
Candidates should hold a master’s degree or higher in materials science, electrochemistry, surface treatment, chemical engineering, or a related field, with at least 5 years of experience in anodizing; alternatively, a bachelor’s degree is acceptable for candidates with at least 8 years of relevant experience.
Proficient in the mechanisms and process window of hard anodizing: control of low-temperature electrolytes (0–5°C), design of current density–voltage profiles, and quantitative relationships between oxidation time and film thickness/hardness.
Possesses proven experience in the mass production of large‑size structural components (on the meter scale) using hard anodizing, and is well-versed in fixture design, masking processes, and control of film‑thickness uniformity.
Familiarity with surface‑treatment requirements for semiconductor equipment vacuum chambers—ultra‑high vacuum compatibility, low outgassing, plasma resistance—preferred; candidates with experience in SEMI standards and client‑approved review processes are given priority.
Has experience with a leading Japanese‑American surface‑treatment company (a surface‑treatment vendor that holds a monopoly on semiconductor vacuum chambers).
Familiarity with anodizing wastewater treatment and environmental compliance requirements; candidates with experience in production line planning and capacity expansion are preferred.

 

Job Application